top of page

How to Charge a WorkOx Electric Utility Truck | No Special Wiring Needed

Published by WorkOx Trucks


Switching from a gas UTV to a WorkOx electric utility truck is a straightforward upgrade ... just take that one step to make sure your property is ready to charge it. The great news is that the charging infrastructure for a WorkOx truck is far simpler than most people expect. You won't need any special contractor visit or complicated wiring project. Instead, you'll simply need a 120V standard household outlet along with a slight end-of-day routine change.



The Basics: What's Needed to Charge a WorkOx Truck?


WorkOx Trucks run on a 72V sealed lead acid battery bank, charged through a standard onboard charging system. For most properties, that means you're not building new electrical infrastructure or installing special wiring; you're simply plugging into what's already there.


WorkOx Standard 72V 64Ah Battery Bank


Step One: Know Your Outlet

A standard 110V/120V household outlet is enough to charge a WorkOx Truck overnight. If you already have power in your barn, garage, shop, or equipment shed, you likely have everything you need to get started.


Things to check before delivery:

  • Is there an outlet within reach of where you'll park the truck? Extension cords work in a pinch, but a dedicated outlet near the parking spot is cleaner and safer long-term.

  • Is the outlet on a circuit that isn't already overloaded? If your shop runs welders, compressors, or other heavy equipment off the same circuit, it's worth confirming the charger won't trip a breaker.

  • Is the outlet weatherproof if it's outdoors? Be sure you're using exterior-rated outlets and covers if the truck is charged while outside.


Step Two: Plan Your Charging Location

Where you park and charge matters more than people think, especially for commercial and agricultural operations running multiple vehicles.


For single-truck operations: A garage, barn, or covered carport near your daily starting point works well. Charging overnight means you start every workday at full capacity.


For fleet operations: If you're running multiple WorkOx trucks, say, across a ranch, distribution yard, or campus, then you'll want to think about charging in zones rather than one central spot. Staggering where trucks park and charge reduces the load on any single circuit and cuts down on daily foot traffic to one location.


Step Three: Think About Duty Cycle

How hard you're running the truck determines how much charging planning you need.

  • Light-to-medium duty (property maintenance, light hauling, occasional runs) - an overnight charge on a standard outlet comfortably covers a full day's use.

  • Heavy duty (full ranch operations, distribution center shuttling, multi-shift job sites) - you may want a second charging window built into your day, or a dedicated charging station if you're running trucks back-to-back.


This is worth discussing with WorkOx before you finalize your order. We'll help you match not only the right model - whether that's our light duty WX3, medium duty WX4, heavy duty WX5 or WX6 or extreme duty WX7 - to your duty cycle but also give you tips on planning your charging routine.


Step Four: Battery Care Starts With Charging Habits

Good charging infrastructure is only half the equation. It's also important how often you charge your battery bank. Following these few healthy habits will protect your battery life over the long run:

  • Charge after each day's use rather than letting the battery bank sit depleted

  • Avoid partial charges as your only routine; let the battery complete a full cycle when possible

  • Keep the charging area ventilated and away from extreme heat or cold when possible


(For a deeper dive on keeping your sealed lead acid batteries in top shape, check out our post on battery care and maintenance.)



What You Don't Need


To be clear about what's not required for charging your WorkOx trucks:

  • you don't need a 240V line

  • you don't need a dedicated EV charging station

  • you don't need a contractor-installed circuit (for most operations).


WorkOx Trucks are designed to simply your work. Every job, every day. That's why operating these trucks doesn't require some EV-style home charging installation - they're built to work with the electrical infrastructure ranches, farms, and facilities already have.



Before Your Truck Arrives: A Quick Checklist


  •  Confirm outlet location and distance from parking spot where you'll charge your trucks

  •  Check circuit capacity if other equipment shares the fuse

  •  Weatherproof the outlet if charging outdoors

  •  Decide on a single-location or zone charging system if running multiple trucks

  •  Review your daily duty cycle to plan charging windows



The Bottom Line


Getting your property ready for either one or a fleet of WorkOx Trucks takes far less effort than you might expect, and in most cases, it's as simple as picking the right outlet and building a charging habit into your daily routine.


If you have questions about your specific setup, reach out to workoxtrucks@gmail.com and we'll walk you through what makes sense for your property.



Grit Tough Utility Trucks. Ready to work the moment you unplug it.

 
 
 

Comments

Rated 0 out of 5 stars.
No ratings yet
Add a rating
bottom of page